User blogs
Your baby’s crib bedding should always keep safe and dirt-free so that there is no hazardous element on their bed. To keep their bedding clean and germ-free, you need to wash their bedding regularly after a specified interval. And, it is imperative to offer them clean and hazardous-free bedding. Besides, their skin is too sensitive to tolerate any intolerable element on their bed. As a concern parents, you have to keep your baby’s bedding dust-free as well as allergen-free to ensure their restful sleep at night. That's why you need to know, how to wash baby crib bedding and how often should you wash them.
The crib bumper is one of the most popular and must-have items in your baby’s bedding. It protects your baby from direct contact with the crib. Besides, it helps your baby keep in place and does not allow him or her to fall from the crib bedding. Baby’s crib bumper also gets stained and dirty. For your baby’s safety and clean environment, you need to wash the bumper as well. So, you should wash your baby’s crib bumper just once a month, and it will do. But before proceeding, make sure there is any hole in the crib bumper or any unwanted stains to remove. Wash the crib bumper in the washing machine but make sure you are using the lower cycle of the machine. Otherwise, it also gets squeaks.
A French favorite, thecrib bumper pad is much-loved by new mothers. Its cushioned contours create a thick barrier against drafts, and will keep your baby’s head from hitting the crib posts.
Not all cribs can accommodate a bumper pad; you should be able to tie a restraint between the head of the bed and the first bar. For example, Combelle beds are ideal for our bumper pads, but Flexa beds are more difficult to adapt.
If you choose to use a bumper pad, we recommend that you find a crib that will allow for restraints to be tied all the way around; these cribs are difficult to find in countries such as Germany, the US, Sweden and Denmark, but they do exist.
Bumper pads come in all sorts of sizes and proportions; the most important aspect to keep in mind is that they should always be tucked between the mattress and the crib frame, to avoid from allowing a baby’s head to get caught between the bumper pad and the frame. As such, all restraints need to be solidly tied to the crib bars.
The maximum length of a bumper pad restraint is 19 cm (7.5 inches), to prevent any risk of suffocation should it come undone. Be wary of promotional photos featuring long, pretty bows — these restraints are likely in violation of security standards.
If you choose a 30-cm (12 in.) high bumper pad, keep in mind that you will not be able to easily adapt it for the lower mattress position (when your baby will be six to eight months old)… and you should never tamper with the restraints to make them longer. If you wish to use your bumper pad for a while, we recommend choosing the 40-cm (15 3/4 in.) high version. Of course, for those with larger budgets or expecting gifts, you can always start with a 30-cm high pad and purchase the 40-cm high version later.
3. In order to facilitate the installation of the iron pipe
(1) According to the material comparison of the specification and the reality, the iron pipe and the upright post are connected one by one, and the iron pipe and the upright post are connected one by one, and the iron pipe adjusts the bayonet which is connected with the iron pipe and is tightly attached to the bed.
(2) If it is the first installation, please do not fix the interface. If the installation is wrong, it is convenient for later adjustment. If there is no problem, it is finally fixed firmly.
4. The basic frame is installed by the above steps, the basic frame of the bed is set up, the upper end of the crib bumper pads surrounding net on three sides is finally put into the iron pipe with the hook, and the damage can be prevented.
The net of the bed
(1) Is first taken out of the iron pipes marked with numbers, the crib bumper pads is penetrated by the net, and there are three, they are used in the left and right of the crib and the tail of the bed, and the iron stick on the head of the bed is provided with a red cloth cover, which can be distinguished by this mark.
(2) Keep the length and number first, do not wear back or wrong, and if you don't remember, it can be determined against the installation instructions, so as to prevent hard work.
Prepare
(1) Ahead of schedule. First, we purchased the back of the crib bumper pads, should be removed, check the accessories, and check whether the accessories of the bed are intact or not. If there is a damaged fitting, contact the seller in time, and then issue a replacement part or replace it.
In order to facilitate the installation of the iron pipe
(1) According to the material comparison of the specification and the reality, the iron pipe and the upright post are connected one by one, and the iron pipe and the upright post are connected one by one, and the iron pipe adjusts the bayonet which is connected with the iron pipe and is tightly attached to the bed.
(2) If it is the first installation, please do not fix the interface. If the installation is wrong, it is convenient for later adjustment. If there is no problem, it is finally fixed firmly.
What is the child's bed enclosure installation procedure? Is there a need to buy a crib fence for a child's crib bumper pads? The invention discloses a method for mounting a child bed enclosure.
The net of the bed
(1) Is first taken out of the iron pipes marked with numbers, the crib bumper pads is penetrated by the net, they are used in the left and right of the crib and the tail of the bed, and the iron stick on the head of the bed is provided with a red cloth cover, which can be distinguished by this mark.
(2) Keep the length and number first, do not wear back or wrong, so as to prevent hard work.
The net of the bed
(1) Is first taken out of the iron pipes marked with numbers, the crib bumper pads is penetrated by the net, and the iron stick on the head of the bed is provided with a red cloth cover, which can be distinguished by this mark.
(2) Keep the length and number first, do not wear back or wrong, and if you don't remember, it can be determined against the installation instructions, so as to prevent hard work.
When checking, pay attention to the size of the force, the force is too large to cause the crib bumper pads to be damaged, and the force is too small, and the purpose of the inspection may not be reached. Please check it in a timely manner.
4. The basic frame is installed by the above steps, the basic frame of the bed is set up, the upper end of the crib bumper pads surrounding net on three sides is finally put into the iron pipe with the hook, and the damage can be prevented.
5. The bed is installed on the left and right sides of the fixed bed around the net, and the bottom of the iron stick is fixed with a screw fitting. If it is determined that there is no problem with the above installation, it is possible to fix the screws by 90%.
4. The basic frame is installed by the above steps, the basic frame of the bed is set up, the upper end of the crib bumper pads surrounding net on three sides is finally put into the iron pipe with the hook, and the damage can be prevented.
5. The bed is installed on the left and right sides of the fixed bed around the net, and the bottom of the iron stick is fixed with a screw fitting. If it is determined that there is no problem with the above installation, it is possible to fix the screws by 90%.
6. The upper part of the connecting iron rod is connected with a fitting cushion, a screw and an upright post, So as to avoid unnecessary hidden trouble in the future.
Prepare
(1) Ahead of schedule. First, we purchased the back of the crib bumper pads, should be removed, check the accessories, and check whether the accessories of the bed are intact or not. If there is a damaged fitting, contact the seller in time, and then issue a replacement part or replace it.
(2) If the spare parts are not damaged or do not match, the installation instructions of the bed shall be read in advance, and the accessories, parts and tools of the bed shall be placed in part.
1. Prepare
(1) Ahead of schedule. First, we purchased the back of the crib bumper pads, should be removed, check the accessories, and check whether the accessories of the bed are intact or not. If there is a damaged fitting, contact the seller in time, and then issue a replacement part or replace it.
(2) If the spare parts are not damaged or do not match, the installation instructions of the bed shall be read in advance, and the accessories, parts and tools of the bed shall be placed in part.
2. The net of the bed
(1) Is first taken out of the iron pipes marked with numbers, the crib bumper pads is penetrated by the net, and there are three, they are used in the left and right of the crib and the tail of the bed, and the iron stick on the head of the bed is provided with a red cloth cover, which can be distinguished by this mark.
(2) Keep the length and number first, do not wear back or wrong, and if you don't remember, it can be determined against the installation instructions, so as to prevent hard work.
Remove the bedspread and remove soft items and soft bedding from the crib bumper pads, reducing the incidence of sudden infant death syndrome, asphyxia and compression. Bed girth has been recommended because it prevents the baby's head from getting stuck in the bed bar, but the new safety standard has narrowed the spacing of the bed bar to effectively prevent the baby's head from getting stuck, and the bed girth is a risk factor for the baby to suffocate and get stuck, so it is not recommended for the baby to use the bed girth.
Although the mechanism by which pacifiers can be used to reduce they can reduce the incidence of SIDS. If the baby spit out pacifier in sleep, do not insert back, if the baby refused to appease the pacifier, do not have to force, can wait for the baby to use a little older. To avoid the risk of strangulation, pacifier should not be tied to the neck and clothing. Plush toys or other items that can cause suffocation risk should not be tied to pacifiers. Breastfed babies need to wait until breastfeeding is stable before introducing pacifiers.
Would you like to come with us for crib bumper pads? Just click: https://linktr.ee/Biloban
Remove the bedspread and remove soft items and soft bedding from the crib bumper pads, reducing the incidence of sudden infant death syndrome, asphyxia and compression.
Would you like to come with us for crib bumper pads? Just click: https://linktr.ee/Biloban
Don't cover the baby too thick to cover the baby too much, will cause dermatitis and other diseases. Babies love to move in crib bumper pads, metabolism is also stronger than adults, wearing too much easy to let babies sweat, the skin will be blocked sweat pores, pustular rash and other skin diseases. Serious can also cause pustular sores, once found on the baby has erythema or pustules, to bring the baby to the hospital in time, if long delay, there is a risk of development success or failure of the disease.
Babies love to move in crib bumper pads, metabolism is also stronger than adults, the skin will be blocked sweat pores, resulting in eczema, pustular rash and other skin diseases. Serious can also cause pustular sores, bring the baby to the hospital in time, a risk of development success or failure of the disease.
Remove the bedspread and remove soft items and soft bedding from the crib bumper pads, reducing the incidence of sudden infant death syndrome, asphyxia and compression.
Would you like to come with us for crib bumper pads? Just click: https://linktr.ee/Biloban
Different beds with parents are recommended and for the parents, in a bed specially designed for the baby. This reduces the incidence of sudden infant death syndrome by 50%. The baby should be put back to the crib bumper pads immediately after feeding or pacifying on the big bed. The following bed-sharing patterns have been shown to increase the risk of sudden infant death syndrome and should be avoided:
(1) Bed with infants under four months of age or with low birth weight infants.
(2) Infants and smokers share a bed (even if they do not smoke in the bed is dangerous) and sleep with mothers who smoke during pregnancy.
(3) The baby sleeps with someone who is hard to wake up from fatigue or medication (e.g. some antidepressants, painkillers, alcohol and drug users).
(4) The baby sleeps with a caregiver or child other than his or her parents.
(5) Babies sleep in soft places, such as water beds, old mattresses, sofas or armchairs.
(6) The baby sleeps with soft bedding such as pillows or blankets.
(7) The benefits of sharing a bed between twins or multiple births have not been confirmed.
